Return to Main Page

The Beverage Equipment Company

Co2 & Nitrogen Regulators & Parts

How To Order!

 Up-Dated 06/2010                     

Order Lines are OPEN TUESDAY THRU FRIDAY 9 AM - 5 PM EST.

Co2 Regulators

Repair Parts

Co2 Manifolds

Fittings

Nitrogen

 
. 502030

Chudnow  Dual Gauge Regulator Complete

With 1/4" Barb shut off and safety relief

$ 59.90

  502030-1  Regulator with 5/16" barb shut off $ 60.25
  502030-3  Regulator with 1/4" male Flare Shut off $ 59.90
  502033  Co2 Assembly: Includes, #502030 Co2 regulator with back check and shut off. 5 foot 1/4" tubing, Ball lock or pin lock Co2 inlet disconnect $ 74.40
       
       
       

Add a Co2 line to the Above assy.

 Add a Co2 Line

 502033-22  

One -1/4" tee, 3 foot 1/4" Co2 line, 2 ea. screw clamps, Ball lock or Pin lock Co2 inlet disconnect w/ check valve. Completely assembled. Just cut existing Co2 line, insert tee and clamp.

$ 21.00

Add a Regulator

 

 502040

 

502041

  Single Outlet, Regulator only less gauges and inlet or outlet fittings

 

              Two line Outlet

$ 24.00

 

 

    Mini Regulators - Low Pressure - 300 PSI inlet x 1- 60 PSI outlet -( 60 or 30 PSI gauge )

502555-1 one - outlet -1/4" Male Flare 24.15
502555-2 two - outlet 1/4" Male Flare 26.50
502555-3 three - outlet 1/4" Male Flare 28.81
502555-4 four - outlet 1/4" Male Flare 31.15
502555-5 five - outlet 1/4" Male Flare 35.50

 
   Co2 Wrench

502051

  Flat wrench, fits over regulator nut, always there when you need it.

$ 3.44

.Gauges

 . . .

Low Pressure Gauges  ( # 1 )

gauge60.jpg (9869 bytes)

502061-30

502061-60

Right Hand  Thread

 

$10.50
0-30 PSI gauge 
0-60 PSI gauge  $10.65
0-100 PSI gauge
0-160 PSI gauge $10.95
0-300 PSI gauge
 

High Pressure Gauges  ( # 2 )

gauge2000.jpg (8937 bytes)

 502063

0-2000 PSI RH gauge (tank pressure) RH

$10.50
  502064

0-2000 PSI LH gauge   (tank pressure)

$10.50
Have a question E-Mail Us
Regulator Repair Parts
Regulator Parts 502066

Nut (connects to tank outlet)  ( # 3 )

$2.89 

Click on to Inlarge     

502067

 Co2 washer (fits inside on nut) ( # 3-1 )

$0.14 

502068

 Nipple inlet Right Hand threads                 ( connects to tank outlet)   ( # 4 )

$7.82 

.

.

.
502069  Nipple inlet Left Hand threads  connects to tank outlet) ( # 4 )

$7.82

 
 83571

The Adapter will allow you to add your existing CO2 regulator to a 12 or 20 ounce CO2 tank.

$ 16.99
 

Tips on Checking for Co2 Leaks

Diaphragm Repair Kits ( # 5 )
Chudnow 502070 Diaphragm assy. w/ Cartridge

$7.80
. .

Instructions

 .

Norgren

 

 

 
502071

Diaphragm Assy. # 7

$ 9.98

502072 Slip Ring # 6

$  .62

502073 Cartridge # 8 & 9

$ 14.28
  502074-3

30 PSI Spring # 5

$ 2.49

  502074-6

60 PSI Spring # 5

$ 2.49

  502074-10 100 PSI Spring # 5

$ 2.49
 

502077

Relief valve   # 10 & 11

$ 9.64

 

Tap Rite

502080

Diaphragm assy. Only

$ 3.62

502082

Repair Kit

$ 14.90

 

502082-3

 30 PSI Spring

$ 1.66

 

502082-6

 60 PSI Spring

$ 1.66

 

502082-10

  100 PSI Spring

$ 1.66

Cornelius

502085

Diaphragm Assembly repair kit

$ 12.90

 

502085-6

 60 PSI Spring

$ 1.93

 

502085-10

100 PSI Spring

$ 1.93
Micro Matic Beer

502087

  Diaphragm Assembly repair kit, w/ Seat cartridge and O-rings

$ 12.82
North American Dispense Systems (Nads)

502088

  Diaphragm Assembly repair kit, w/ seat cartridge, bonnet gasket.

$ 12.82
       
 
Regulator Outlet Fittings ( # 6 )   mpt=Male Pipe Thread

55490

 1/4"male flare x 1/4" pipe thread ( No Check Valve) $ 0.99
Inline Check Valve

55491

 1/4" male flare x 1/4"fm flare check valve w/ Flare Washer (attach to Co2 fitting for 5 gallon tanks) $ 4.11
Check Valve for Co2  regulator

55492

 1/4" Male flare x 1/4" pipe thread w/ Check Valve $ 3.25

 

Add another line                 

55493

 1/4" air 'Y' -1/4" male pt x 1/4" female pipe thread x 1/4" female pipe thread $ 7.40

 

55494-3

  1/4" mpt x 3 each 1/4" male Flare  

55494-5

  1/4" mpt x 5 each 1/4" male Flare  

 

    
Thread Nipple       F

55496-1

 

 1/4" m-pt  x 1-1/8" Right Hand Thread

1.90

 

F

55496-2

 1/4" m-pt  x 1-1/8" LEFT Hand Thread 2.90

           B

55496-3

 1/4" m-pt x 2" Right Hand Thread 3.10

55496-4

 1/4" M-pt Right Hand x  1/4" M-pt Left Hand Thread 2.55

                           F

55497

 1/4" MPT x 5/16" barb air/ Co2 shut off $ 10.70

B

55497-1

 1/4" MPT x 5/16" barb air/Co2 shut off w/check valve $ 12.70

    F

55497-2

 1/4" MPT x 1/4" barb   air/ Co2 shut off $ 12.30

F

55497-3

 1/4" MPT x 1/4" Male Flare air/ Co2 shut off w/check valve $ 12.35

F

55497-4

 1/4" barb x 1/4" barb     air/ Co2 shut off $ 10.30

                      C

55497-5

 1/4" MPT x 1/4" barb air/ Co2 shut off w/check valve $ 12.35

F

55497-6

 3/8" barb x 3/8" barb    air/ Co2 shut off $ 10.30
1/4" Plug  Plug

502095

 1/4" m-pt plug Right Hand thread $ 1.10
 

502096

 1/4" m-pt plug Left Hand thread. $ 1.10
  Barb Nipple

55499-1

 1/4" m-pt x 1/4" Barb 1.90
 

55499-2

 1/4" m-pt x 5/16" Barb 1.90

 # 7 -  Safety Valve  Blow off pressure range is ±10% of actual rating

502090- 40 40 PSI x 1/4" MPT Stainless Steel 4.95
502090- 60 60 PSI x 1/4" MPT Stainless Steel 4.95
502090-100 100 PSI x 1/4" MPT Stainless Steel 4.95
Brass Safety Valve

502091-40 40 PSI x 1/4" MPT Brass 3.86
502091-60 60 PSI x 1/4" MPT Brass 3.86
502091-860 60 PSI x 1/8" MPT Brass 4.05
502091-100 100 PSI x 1/4" MPT Brass 3.86

 Also available 1/8" & 3/8" MPT - 150,180,225 & 275 PSI

m-pt = male pipe thread

 

Have a question E-Mail Us

#  502035 Nitrogen Regulator

    

 

 Double Gauge w/ shut off

 

$ 75.50

Other Nitrogen Regulators also available Please Call

 
Call for Used Co2 Tank Availability

Co2 And Air Manifolds and Tanks

Manifold Shown with out check valves. Larger Manifolds are also available. Inlet and outlet fittings may be changed for your application.

(Manifold style may change per supplier)
55142  2- valve w/back checks 38.21
55143 3- valve 43.88
55143-2 3- w/ Back Checks 49.88
55143-2HB 3- w/ Back Checks, w/3 ea. (3 ft) 1/4" tubing and disconnect for pin or ball lock kegs  
     
55144 4- valve 63.45

55144-2

 4- w/ Back Checks 71.45
55144-2HB 3- w/ Back Checks, w/3 ea. (3 ft) 1/4" tubing and disconnect for pin or ball lock kegs  
     
  55145 5- valve 78.75
  55145 5- w/ Back Checks  88.75
  55146 6- valve 88.13
 

55146

6- w/ Back Checks 100.13
 

Manifolds from 2-12 outlets and can be connected in multiples to your specifications
  502077-2 60 PSI Safety relief valve    1/4 " MPT    6.80
                     Pre-Manifold Check Valve 55491 Replaces barb inlet $ 3.99
See more fittings @ Brass Fittings
See also Beer Gas Line Assemblies
 
Co2 Bottles ( Not Filled)
From time to time we come across refurbished Co2 tanks. Call for Pricing  (10/10)
CO2-25    2.5 Lb. New Aluminum 4.3/8"  Dia. x 12.75 " H @ 4.6 Lb.

      $79.95
CO2-05  5 Lb. New Aluminum 5.25"  Dia. x 18.25 " H @ 7.6 Lb.

 $ 84.92
C02-10 10 Lb. New Aluminum   6.9" Dia. x 20.25 " H @ 7.6 Lb.

$115.99
CO2-20 20Lb. New Aluminum 8" Dia. x 27.25 " H @ 24.5 Lb. ( with out handle)

 $143.99
CO2-110   Add Handle for above 10 & 20 Lb. tanks

$2.49

 

Have a question E-Mail Us

How To Order!

  
 

The WeekEnd Brewer Home Brew Supply

©  The Beverage Equipment Companies 1972. All rights reserved.

 Order Page | Hours & Location

Contacts