#
164 #
173S
Carbonated Soda Dispensing Arm - & Accessories
#
164 #
173S
| Tower 2" Stainless Steel | ||
| 164S2 | Pull arm Mixed Soda Valve / Push carbonated water jet only -tower | $ 127.00 |
| 164 | Pull arm Mixed Soda Valve -One Valve - tower | 146.00 |
| 164-2 | Pull arm Mixed Soda Valve -Two Valve - tower | 217.00 |
| 164-3 | Pull arm Mixed Soda Valve - three valve - tower | 264.00 |
| 173S | Soda Arm - Pull | 178.00 |
| Wall Mount | ||
| 152S/W | Pull arm Mixed Soda Valve / Push carbonated water only | $ 97.53 |
| 151-1 | Pull arm Mixed Soda Valve -One Valve | 99.99 |
| 151-2 | Pull arm Mixed Soda Valve -Two Valve | 175.00 |
| 151-3 | Pull arm Mixed Soda Valve - three valve | 235.00 |
| Also Available in 3 " shank | ||
| 153 S/W | Soda Fountain Soda Only Arm | 189.00 |
| Mix - Soda & Water configurations | ||
Call for complete system kits, pieces or parts. 1-800-320-1456
NSF Approved Ice Bins: Free standing with sealed Cold Plate
| Free Standing - Unit Stainless Steel Bin and covers | ||
| 85-0461 | 15" x 22" x 14-1/2" deep - 60 pound Ice / 7 circuit Cold Plate | $ 752.81 |
| 51-0389 | Leg Kit 15 x 22 | 65.39 |
| 85-0462 | 21" x 22" x 14-1/2" deep - 100 pound Ice / 9 circuit Cold Plate | 793.60 |
| Leg Kit 21 x 22 | 68.18 | |
NSF Approved: Drop
In Ice Bin
|
Drop In Unit - Stainless Steel Bin and covers |
||
| 85-0408 | 15" x 22" x 14-1/2" deep - 60 pound Ice / 7 circuit Cold Plate | $ 658.04 |
| 85-0402 | 21" x 23" x 14-1/2" deep - 100 pound Ice / 9 circuit Cold Plate | 839.79 |
NSF Approved Ice Bins: Free standing Ice bin only
| DI-1522 Poly | Stainless Steel 15" x 23" Poly lined bin, for ice dispensing only |
$ 463.88 |
| LS 1522KD | Stainless Steel Leg kit |
$ 64.54 |
Bag In Box Systems Complete
Includes both High & Low
pressure Co2 regulators
Bag in Box Pumps and racks 'Black'
|
2-BIF-J |
2 Pump Rack, 2 wide x 1 high 28" wide | $ 30.59 |
|
3-BIF-J |
3 Pump Rack, 3 wide x 1 high 28" wide | $ 42.06 |
| 2-BPM-6 | Top Pump Mount, 2-wide with 2 bar mount - holds 4 pumps | $ 36.82 |
| 3-BPM-8 | Top Pump Mount, 3-wide with 2 bar mount - holds 6 pumps | $ 44.58 |
|
Pre assembled rack with pumps and low pressure regulator |
||
| 85-1803-2306 (*) | 6 Pumps with Rack Complete / Flow Jet air drive 33 H x 28W x 17D, 2 shelve x 3 wide | $ 959.09 |
* C= Coke Style -- P= Pepsi /QCD fitting |
||
| N5000-602(*) | Single Pump assembly with tubing and disconnect | $ 65.61 |
| JC | ||
Coke BIB
Pepsi QDC
| 82-0291 | Coca-Cola BIB connector | $ 3.15 |
| QCD-11 | Pepsi Style BIB connector | $ 5.61 |
| 735075 | PCS BIB connector | $5.40 |
Co2 Regulators Assemblies / Regulator Parts
502034 |
High Pressure Co2 Regulator Assy. / tank mount with two regulators (one for carbonation /one for products) w/ 2 ea. 1/4" -10 ft. line assy. | $ 89.90 |
502030 |
Single High Pressure Co2 Regulator | 59.90 |
502040 |
Single Low Pressure Co2 Regulator w/ one outlet, Wall Mount | 37.00 |
502040- |
Single Low Pressure Co2 Regulator w/ 5 outlet, Wall Mount | 48.00 |
| chud |
Line Assembles can be made to order at no extra charge
STAINLESS STEEL SODA COOLERS
A standard in the industry for years, these all stainless steel coolers
are constructed of heavy gauge 2" O.D. tubing with welded end
caps and 1/4" male flare fittings. Standard length 11".
#SC211V --
#SC-311H --
#SC411V
| SC111H | 1 cooler w/ 1/4" inlet and outlet - both each ends. Horizontal Use | 23.40 |
| SC111VV | 1 cooler w/ 1/4" inlet and outlet - (1) on each end cap. Inline Use | 23.40 |
| SC211H | 2 coolers w/ 1/4" inlet and outlet - both each ends. Horizontal Use | 42.12 |
| SC211V | 2 coolers w/ 1/4" inlet and outlet - end cap (shown). Vertical Use | 42.12 |
| SC311H | 3 coolers w/ 1/4" inlet and outlet - top (shown). Horizontal Use | 62.60 |
| SC411V | 4 coolers w/ 1/4" inlet and outlet - end cap (shown). Vertical Use | 78.00 |
Recirculating Pumps / Carbonator
# 85-1360
This new unit provides highly carbonated cold water for maximum soft drink quality. A sturdy stainless steel pump moves carbonated water through the cold plate or chiller at just the right speed and volume to maximize efficiency, no matter the brand, model, or vintage. The compact package is easy to install, in new service locations and as a retrofit into existing ones. 2 -1/3 HP/ 115V. Motors, 1 w/stainless steel pump- 1 w/ brass pump with carbonator tank.
| 85-1360 | Stainless Steel recirculation w/ carbonator. Asse 1022 Vent device |
$ 659.99 |
| 85-1362 | Carbonator in a box. Great for Bars and home use, 1-4 valves | 403.90 |
| 85-1364 | Small Carbonator -Great for bar guns and 1-4 valves | 383.90 |
| 85-1368 | Big Mac - high volume 6-8 valves | 415.00 |
| 85-1370 | Motor and Stainless Steel pump for Recirculating soda water 1/3hp.w/cord | 162.96 |
JKC/McC |
#85-1362
#85-1364
#85-1368
Call for complete system kits, pieces or parts. 1-800-320-1456
Typical Home System:
Soda Arm, Carbonator, Co2 Regulator and tubing for Co2 and Soda installation.
© The Beverage Equipment Companies 1972. All rights reserved.